Threaded Mode | Linear Mode

volumnus · 02-19-2012, 11:29 AM

I can stream DTS, DTS Matrix, and Dolby 5.1 without issue.

I cannot stream DTS-HD or Dolby Tru-HD. I have used multiple .m2ts files to test the system. I have a Denon AVR 3311 receiver. I am streaming over HDMI. I have no problem with DTS-HD when playing blu-ray disks.

I have tried disabling windows media foundation as suggested in a similar thread. It didn't work.

Shark007 · 02-19-2012, 11:31 AM

try also disabling the Microsoft Audio decoder

volumnus · 02-19-2012, 11:55 AM

(02-19-2012 11:31 AM)Shark007 Wrote: try also disabling the Microsoft Audio decoder

I also tried disabling Microsoft Audio decoder and disabling Audio decoder and Video Decoder, and I'm getting nothing but pro-logic.

Shark007 · 02-19-2012, 11:59 AM

please go to the Setup and usage post.
About 2/3 of the way down, it deals with ts files Audio setup

If you cannot get it to work, post a sample for testing
to create a sample, use the dropbox on the Misc TAB.
The sample creation dropbox only works in non administrative mode.
Upload the sample to meiafire.com, grab the download url, and post it here

volumnus · (This post was last modified: 02-19-2012 12:19 PM by volumnus.)

I used the sample site that is often recommended over at the AVS forum.

Here is the Dolby TruHD clip I most recently tested...

http://www.demo-world.eu/trailers/redire...ssless.rar

Here is the DTS-HD clip...

http://www.demo-world.eu/trailers/redire...ssless.rar

Hint: To download the file...click the download button that has two arrows pointing at both sides.

Shark007 · 02-19-2012, 12:20 PM

both formats work OK for me.

dis you install other codec packs? LAV filters? anything from DivX? ffdshow? Haali?

volumnus · 02-19-2012, 12:23 PM

(02-19-2012 12:20 PM)Shark007 Wrote: both formats work OK for me.

dis you install other codec packs? LAV filters? anything from DivX? ffdshow? Haali?

No...the only thing I installed was your Win 7 Codecs, your 64 bit package, and your MPC pre-configured player.

Shark007 · 02-19-2012, 12:24 PM

Is UAC disabled?

What version of my codecs do you have installed?

volumnus · 02-19-2012, 12:29 PM

(02-19-2012 12:24 PM)Shark007 Wrote: Is UAC disabled?

What version of my codecs do you have installed?

I'm using the newest version of everything. I reset all the setting to default. I am not sure what UAC is.

Shark007 · 02-19-2012, 12:31 PM

press [Reset All]
select the [x] SUUGGESTED settings checkbox
on the Audio TAB, set TrueHD/DTS-MA
on the MKV TAB, set the LAV splitter