Threaded Mode | Linear Mode

defiantmofo · 04-05-2012, 02:48 PM

I have a HTPC connected to my Denon-2310 AVR, connected to my Samsung TV. I recently built a new HTPC(windows 7 64-bit) with a gigabyte motherboard using the Intel HD3000 onboard hdmi. Most things work fine using Shark007s codec packs, however i have one large issue. When i close media center and want to watch a youtube video or listen to pandora, no sound is outputted from my htpc. On the HTPC, the mixer shows volume is being sent, but the receiver does not produce any sound.

UAC Enabled
Current Shark007 settings. (32bit and x64)
All default except.
No subtitles
Enable bitstreaming(selects same as input for # of speakers)

Bitstreaming and LiveTV work fine, it just seems that when it switches from DTS to what needs to be stereo, the switch doesn't occur.

Any tips would be appreciated.
thanks,

-bill

Shark007 · 04-05-2012, 02:52 PM

(04-05-2012 02:48 PM)defiantmofo Wrote: no sound is outputted from my htpc. On the HTPC, the mixer shows volume is being sent, but the receiver does not produce any sound.

I would think this problem is a setting on the AVR.
Look for something similar to 'Direct' and set that on AVR itself.

defiantmofo · 04-09-2012, 10:48 PM

(04-05-2012 02:52 PM)Shark007 Wrote:
(04-05-2012 02:48 PM)defiantmofo Wrote: no sound is outputted from my htpc. On the HTPC, the mixer shows volume is being sent, but the receiver does not produce any sound.

I would think this problem is a setting on the AVR.
Look for something similar to 'Direct' and set that on AVR itself.

I set the receiver to pure direct instead of auto format and it's working perfectly. Thanks.